General Multi-Functional Driver Board for Robots, Based on ESP32-WROOM-32 Module, Support WiFi, Bluetooth and ESP-Now Communications, Compatible with
当サイトをご覧頂き誠にありがとうございます。弊社商品は全て正規店からの新品・並行輸入品です。税関手続・関税払いは全て弊社で対応の上、全国送料無料でお届けします。弊社海外倉庫より国内に発送しますので、お届けまで2-15営業日程度お時間を頂いております。税関検査により無作為に開封された場合、ごく稀に外箱に損傷が生ずる場合がありますが、商品自体の品質には問題ございませんのでご安心ください。（商品が電波法上の技術基準に適合する必要がある無線機器の場合：商品は並行輸入品のため、電波法上の技術基準に適合致しません。日本国内で使用すると電波法に違反する恐れがありますので、ご購入・ご使用には十分ご注意ください）
Based on the ESP32-WROOM-32 module, supports wireless communication methods such as WIFI, Bluetooth, and ESP-NOW.
Onboard motor control interface for 2x DC motors with encoder or 4x DC motors (two groups) without encoder.
Onboard serial bus servos control interface for controlling up to 253 ST3215 serial bus servos and obtaining servo feedback.
Onboard 9-axis IMU can obtain attitude and heading information at any time.
7~13V voltage input can be powered directly by 2S or 3S lithium battery.
Automatic download circuit for easy uploading demos.
Support input voltage and current monitoring.
Onboard TF card slot.
Onboard Lidar interface and integrated UART to USB function.
IIC interface for expanding other peripherals such as OLED, IMU, and other IIC communication protocols.
Multi-functional extended interface, adapting to remaining interfaces for additional functions, such as controlling servos or relays.
40PIN extended header for connecting to Raspberry Pi, Jetson Nano, and other host computers, communicating via serial port or IIC, and powering the host computer.
Provides open-source demos for onboard resources, and detailed tutorials for beginners to get started.
Specification
Main Controller : ESP32-WROOM-32
Power Supply : DC 7-13V
Power Port : XH2.54
Antenna Connector : IPEX1
Download Interface: Type-C
Control Chip : ESP32
Wireless Communication: WIFI, Bluetooth, ESP-NOW
Dimensions : 65 x 65mm
Mounting hole spacing : 49 x 58mm
Mounting hole diameter : 3mm
Online Development Resources /User Manuall://bit.ly/42E7Nbc
Package Content
General Driver for Robots x1
Screws pack x1
当サイトをご覧頂き誠にありがとうございます。弊社商品は全て正規店からの新品・並行輸入品です。税関手続・関税払いは全て弊社で対応の上、全国送料無料でお届けします。弊社海外倉庫より国内に発送しますので、お届けまで2-15営業日程度お時間を頂いております。税関検査により無作為に開封された場合、ごく稀に外箱に損傷が生ずる場合がありますが、商品自体の品質には問題ございませんのでご安心ください。（商品が電波法上の技術基準に適合する必要がある無線機器の場合：商品は並行輸入品のため、電波法上の技術基準に適合致しません。日本国内で使用すると電波法に違反する恐れがありますので、ご購入・ご使用には十分ご注意ください）
カテゴリー:
メーカー: Waveshare
ブランド: waveshare
高さ: 2.3 センチ
幅: 5.1 センチ
奥行: 7.6 センチ
重量: 0.0 Kg
- The multifunctional driver board specially designed for robots provides more possibilities for robots. Based on the ESP32-WROOM-32 module, Arduino IDE can be used for development, and it supports a variety of wireless communication methods, including WIFI, Bluetooth, and ESP-NOW. Rich Peripheral interfaces, suitable for different types of robots.
- ESP32 Main Controller,Rich Resources for secondary development. Built-in WiFi and Bluetooth, as well as ESP-NOW support, for wireless communication.
- 40PIN GPIO extended header. The inner side 40PIN header is for directly connecting to the Raspberry Pi or other host boards. And extend the outer side 40PIN header for connecting with other HATs via cables
- Serial Bus Servo Control: Allows controlling up to 253 ST3215 serial bus servos at the same time. Voltage and current monitoring.Onboard voltage/current monitoring chip to obtain the power supply status of the robot at any time.
- Onboard 9-axis IMU: Onboard QMI8658C + AK09918, for detecting movement, orientation, and magnetic. Support Obtaining the heading angle of the robot anytime and anywhere.
Based on the ESP32-WROOM-32 module, supports wireless communication methods such as WIFI, Bluetooth, and ESP-NOW.
Onboard motor control interface for 2x DC motors with encoder or 4x DC motors (two groups) without encoder.
Onboard serial bus servos control interface for controlling up to 253 ST3215 serial bus servos and obtaining servo feedback.
Onboard 9-axis IMU can obtain attitude and heading information at any time.
7~13V voltage input can be powered directly by 2S or 3S lithium battery.
Automatic download circuit for easy uploading demos.
Support input voltage and current monitoring.
Onboard TF card slot.
Onboard Lidar interface and integrated UART to USB function.
IIC interface for expanding other peripherals such as OLED, IMU, and other IIC communication protocols.
Multi-functional extended interface, adapting to remaining interfaces for additional functions, such as controlling servos or relays.
40PIN extended header for connecting to Raspberry Pi, Jetson Nano, and other host computers, communicating via serial port or IIC, and powering the host computer.
Provides open-source demos for onboard resources, and detailed tutorials for beginners to get started.
Specification
Main Controller : ESP32-WROOM-32
Power Supply : DC 7-13V
Power Port : XH2.54
Antenna Connector : IPEX1
Download Interface: Type-C
Control Chip : ESP32
Wireless Communication: WIFI, Bluetooth, ESP-NOW
Dimensions : 65 x 65mm
Mounting hole spacing : 49 x 58mm
Mounting hole diameter : 3mm
Online Development Resources /User Manuall://bit.ly/42E7Nbc
Package Content
General Driver for Robots x1
Screws pack x1
当サイトをご覧頂き誠にありがとうございます。弊社商品は全て正規店からの新品・並行輸入品です。税関手続・関税払いは全て弊社で対応の上、全国送料無料でお届けします。弊社海外倉庫より国内に発送しますので、お届けまで2-15営業日程度お時間を頂いております。税関検査により無作為に開封された場合、ごく稀に外箱に損傷が生ずる場合がありますが、商品自体の品質には問題ございませんのでご安心ください。（商品が電波法上の技術基準に適合する必要がある無線機器の場合：商品は並行輸入品のため、電波法上の技術基準に適合致しません。日本国内で使用すると電波法に違反する恐れがありますので、ご購入・ご使用には十分ご注意ください）
カテゴリー:
メーカー: Waveshare
ブランド: waveshare
高さ: 2.3 センチ
幅: 5.1 センチ
奥行: 7.6 センチ
重量: 0.0 Kg